Initial Setup: Exiting Sleep Mode

The watch ships in sleep mode to conserve battery during storage and shipping.

To activate the watch:

• Press and hold Button A and Button B together for 15 seconds.
• The watch will automatically activate and display IST (Indian Standard Time).
• After activation, proceed to Setting 1 to adjust the time to your current time zone if needed.

Setting 1: Basic Time Setting

Use this setting to adjust the current time.

Set the Time

1. Press and hold Button B for 3 seconds.
2. The minute indicator will vibrate, indicating adjustment mode.
3. Press Button A or Button B to move the time forward or backward.
4. Stop when the correct time is displayed.

Setting 2: Hand Factory Position Adjustment

Use this setting if the time indicators are not aligned correctly.

Enter Factory Adjustment Mode

1. Press and hold Button A and Button B together for 10 seconds.
2. All indicators will return to their factory (default) positions.

If the watch exits adjustment mode automatically, wait 5 seconds and repeat the steps above.

Adjust Hand Positions (If Needed)

1. Press and hold Button A + Button B for 10 seconds to enter factory mode.
2. The minute indicator vibrates → adjust using Button A / Button B until it points to 0.
3. Press Button A + Button B again.
4. The hour indicator vibrates → adjust using Button A / Button B until it shows 12.

Finish

• Wait 5 seconds after completing adjustments.
• The watch will return to normal mode automatically.
• Go back to Setting 1 (Basic Time Setting) and set the correct time to finish.